Make any wired security camera go wireless video with this 2.4ghz Video Audio Receiver and Transmitter kit. 4 channel signal switchable with w/built in Video scramble for less interference. 10mW with 3dBi for Transmitting up to 700ft LOS (open space or line of sight is always recommend). 1yr warranty.

Direction: Plug transmitter to any wired security camera with your a/v cable. Plug receiver to any surveillance dvr (digital video recorder) or monitor. Make sure to power the transmitter and receiver to a wall power outlet. **To use higher gain antennas, make sure to use SMA-MALE antenna**

Feature
•2.4GHz Video + Audio
•Video scramble
•ID addressing
•Omni directional antenna 3dBi
•4 Channel selectable by switch
•Up to 700ft LOS
•Compact Design
•12vDC Power

Package Include:
- 1pc receiver 2.4ghz
- 1pc transmitter 2.4ghz
- 2pcs 12 volt wall power adapter

Receiver
•SMA Female Connection
•2.4GHz Video + Audio Receiver
•2.4 GHz 4CH RX module
•Video scramble
•ID addressing
•Omni directional dipole antenna 3dBi
•4 Channel selectable by switch
•Built-in Bias-Tee 3.3V/25mA for active antenna connection
•Alarm output for siren or flashing (Build-in alarm buzzer)
•Audio Output
•Video Output
•Frequency Channels: CH1: 2413MHz, CH2: 2432MHz, CH3: 2451MHz, CH4: 2470MHz
•TX Power: 10mW
•RF Impedance: 50 O Typical
•Video Input/ Output: 1.0 Vp-p Composite @ 75O
•Audio Input/ Output: 2.0 Vp-p Max. (600O)
•Alarm: NC/NO/COM
•Power Consumption: DC 12V/250mA
•Operation Temp.: -10°C ~ 50°C
•Storage Temp.: -30°C ~ 85°C
•Dimensions: 110 x 88 x 30mm (without Antenna)

Transmitter
•SMA Female Connection
•2.4GHz Video + Audio Transmitter with Alarm
•2.4 GHz 4CH TX module
•Transmits AV up to 700ft (Light-of-sight) / open space for maximum
•Video scramble
•ID addressing
•Omni directional dipole antenna 3dBi
•Alarm trigger input for remote sensor/ detector (Build-in alarm buzzer)
•4 Channel selectable by switch or autoscan mode
•Connect any cameras or video signal to transmitter
•10 mW output
•DC 12V / 750mA output
•Frequency Channels: CH1: 2413MHz, CH2: 2432MHz, CH3: 2451MHz, CH4: 2470MHz
•TX Power: 10mW
•RF Impedance: 50 O Typical
•Video Input/ Output: 1.0 Vp-p Composite @ 75O
•Audio Input/ Output: 2.0 Vp-p Max. (600O)
•Alarm: Level Detection (5V TTL)
•Power Consumption: DC 12V/95 mA (Start-up Current: DC 12V/500mA)
•Operation Temp.: -10°C ~ 50°C
•Storage Temp.: -30°C ~ 85°C
•Dimensions: 110 x 88 x 30mm (without Antenna)