Step 1. Before
doing any installation with your Surveillance camera,
we recommend you test the surveillance camera directly
to any
TV or CCTV Monitor first. Make sure it work properly
this way if your installation don't work after you
installed. You will know whether the defect is from
the camera or your installation is incorrect.
Diagram
A) Installation for Multiple Security Cameras with
Video-Only Cable Separate from Power Cable
Here is a diagram of a multiple installation
surveillance cameras. We
recommend you use a siamese(combo)video-power cable makes
your installation alot easier...click here for our video/power
cables.
Step 2. Taking each security cameras. Plug video-extension to security camera
video-connection.
Do
the
same to power-extension to camera power-connection. Plug end of video-extension
cable
to Recorder (Video-In). **Your recorder must have
more than 1 video-in enable to do multiple camera installation**If you are using
a
VCR
recorder, please use CCTV
Splitter.
Step 3. Plug power-extension cable to wall-power adapter, then plug power adapter
to any wall outlet or power box. Do the same to each security cameras.
Step 4. Using an RCA or BNC Video cable,
Plug Recorder video-out into Monitor
Video-In.
Step 5. Turn on your monitor to Video channel, and you are now
ready for Surveillance!! **Video channel
will not be neccessary if
you are using digital monitor, simply just power on digital
monitor.
Video-Only installation
Diagram A) Installation for Multiple Security Cameras
with Video&Power Siamese(combo) cable
This diagram here show you how to install
multiple security cameras with Combo/Siamese cable with
Video&Power. We
recommend you use a siamese(combo)video-power cable makes your CCTV installation
makes it alot
easier...Click here for our video/power
cable.
Step 2. Taking each security cameras. Plug video/power-extension-cable
to security camera video & power connection. Plug end of video/power extension
cable
to Recorder (Video-In). **Your
recorder must have more than 1 video-in enable to do multiple camera installation**If
you are using
a
VCR
recorder, please use CCTV
Splitter.
Step 3. Plug other end of power-extension connector to wall-power adapter or
power
box. Repeat this step with all the security cameras.
Step 4. Using an RCA or BNC Video cable,
Plug Recorder video-out into Monitor
Video-In.
Step 5. Turn on your monitor to Video channel, and you are now
ready for Surveillance!! **Video channel
will not be neccessary if you are using digital monitor, simply just power on
digital
monitor.
Video&Power installation
If you need further assistance
please contact us Customer
Support Form . We appreciate any feedback you can
give us. Read more on our other CCTV Security Cameras.
