This is a broadband receiver designed to detect
and locate all major types of electronic surveillance devices
including room, phone, body bugs, video transmitters, and
tape recorders.
This item provide a very
important cost-effective tool for professional sweep teams,
government security personnel, and private citizens with
important security needs. The receiver is very effective
for rapidly detecting and locating transmitted signals,
while being very easy to learn to use. The receiver sweep
kit includes a custom Cordura case that contains all items
necessary to conduct a professional sweep.
Advantages:
1. Portable Sweep Kit - provides everything needed to perform
a professional sweep; fits inside a standard briefcase.
2. Multi-Functional Utility - Comes with probes to detect
RF transmitters (audio and video), carrier current transmitters,
and telephone bugs. Probes also available to detect for
infrared transmitters, tape recorders, and acoustic leakage.
3. Wideband Coverage - from 200Hz to over 3GHz with no
holes or gaps.
4. Monitor Mode - after a sweep, the alarm monitor (silent
or audible alert) guards against new devices brought in
or remote control activation of surveillance devices.
5. Auxiliary Audio Input - allows user to listen to telephones
or lines for "hotmikes," hookswitch by-pass and "infinity" bugs.
Unknown wires and cables can be tested for wired microphones.
Specifications
R.F. Probe
Gain: 20dB nominal Frequency
Response: 50kHz-2GHz ±3dB 3GHz-10dB
Sensitivity: -62dBm (1 segment) -85dBm M.D.L.
VLF Probe
Frequency Response: 15kHz-1MHz-3dB
MAX input voltage: 300 VAC 50-60Hz
Isolation: 1500 VAC 60Hz
Sensitivity: -38dBm (1 segment) -60 M.D.L.
Audio Amplifier
Input Impedance: 50K Ohm balanced
Input Range: 1.7uV-10V (135dB) AGC
Dynamic Range: 100dB (high and low gain)
Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave,
2.5kHz-18dB/octave
Headphone Output: 5Vp-p 220
Record Out: 25 mVp-p nominal with AGC
Display
- LCD bargraph
18 segment with pulsing single segment
trip point
50dB dynamic range (1 segment High Gain to MAX Low Gain)
- Alert Output
2.8kHz tone or silent red LED at 2Hz
Remote Output: N.O. contact (300mA 25V MAX)
-
Battery
8 ea. MN1500 AA Alkaline - Life 10-16 hrs
(Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge
Low Battery Indicator: approx. 10% remaining power
- AC adpter/Charger
Input: 95-l30VAC 50-60Hz, or 200-275VAC
50-60Hz
Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs
- Receiver Unit
Size: 9 1/8 x 6 1/8 x 1 3/4 in
Weight: 39 oz
- Carry Case with all standard Items
Size: 16 3/8 x 11 1/4
x 3 in
Weight: 7 lbs
